Max Measure 1.2.5.AF

Review of Length and Distance Measurement Application

Main Features:

1. Utilizes Various Measuring Methods: Gravity Sensor, Camera, Touch Screen, and Acceleration Sensor.
2. Calibration Function: Enables accurate measurement of angles with sensors.

Instructions:

1. Ruler Mode:
   1. Works like a standard ruler using the screen.
   2. Precise length measurement achieved through screen touch.
2. Measuring Tape Mode:
   1. Align the measuring object parallel to the device.
   2. Drag the device using the screen touch.
   3. Repeat dragging motions and note the measured value.
3. Rate of Length Mode: Align the hair crosshair with the measuring object.
4. Sweep Mode:
   1. Touch the screen.
   2. Sweep in the direction of the arrow.
   3. Release the screen akin to Drag and Drop on a PC.
   4. If a significant measuring error occurs, place your device on a flat, stable surface. Proceed by touching the screen for 2 seconds and navigating to Menu -> Calibration.
5. Distance Mode:
   1. Set your height in Menu -> Setup.
   2. Position your device at eye level with the center crosshair on the screen indicating the object's bottom.
   3. Read the distance displayed on the screen.

Caution:

1. Possible tolerance due to device sensor accuracy.
2. The optimized measuring ranges for each mode are as follows:
   • Ruler Mode: 0-10cm (varies according to screen size)
   • Sweep Mode: 0.1-1.5m
   • Distance Mode: 1-30m
3. Please consider using a protective wrap or case, especially in Sweep Mode.
   </hap>, especially in Sweep Mode.